Motec Display Creator Instrukcja Użytkownika Pobierz pdf (Strona 7)

How to Create a Display Configuration 7

How to Create a Display Configuration

To create a functioning display the following tasks are required.

☛

The tasks, sequence and dependencies shown below are provided to indicate functional relationships. Pages,

elements, channels etc. can be created, deleted, modified at any time, and at will.

Setup

It is best to define the display device and default font before performing any of the tasks below, see Settings

Tab. Changing the device after creating a display configuration will automatically resize all elements so as to fit

on the device's screen.

Task When Reference Links

1 Any time before 12 Communications Tab

* Setup communications (messages and signals)

Importing a DBC file

2 Any time before any of 3, 6, 7, 10, 11, 12 Channels & Functions Tab

* Setup channels for use in the display elements

Importing a DBC file

3 After 1 and 2 Communications Tab

* Assign channels to signals

Importing a DBC file

4 Create pages (each page covers the whole screen) Any time Pages Tab

5 Create page display elements Any time Page Elements

6 Assign channels to display elements on each After 2

relevant page

7 Define conditions on which pages are displayed After 2 Pages Tab

8 Create alarm displays (these are placed on pages) Any time About Alarms

Alarm Displays

9 Create/modify alarm display elements Any time after 8

Alarm Elements

10 After 2

** Assign channels to alarm display elements

11 Define alarm conditions After 2

12 Validate and configure device Validate any time during creation to check Project Validation

for issues. Configure device when ready, an

Configure Device

automatic validate step occurs first.

Configuration must be valid before the

system sends the display configuration to

the device.

Use this link to view a webinar showing the creation of a basic configuration using a DBC file, webinar_DBC.

* For C Series display/loggers, these tasks can be automatically performed by importing the DBC file that is

automatically generated by Dash Manager. If required, manual adjustments can still be made. See Importing a

DBC file. For D Series displays, importing a DBC file is not applicable. However, a quick display can be setup by

using one of the provided samples. See Introduction.

** For C Series display/loggers, if a DBC file is imported, all alarms are automatically set to display in the

Alarm Display element on the Overlay Page. See Overlay Page

1 2 3 4 5 6 7 8 9 10 11 12 ... 65 66

Komentarze do niniejszej Instrukcji

Brak uwag

Motec Display Creator Instrukcja Użytkownika Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Motec Display Creator